- G8P8+RM9, Ichhra, Lahore, 54000
- order@aquaprima.pk
- 0327 45 755 27
A 2000 LPH reverse osmosis plant is designed for large commercial operations, water businesses, factories and facilities with high sustained daily water demand. At 20 hours of operation, it produces approximately 40,000 litres of purified water per day.
| Configuration | Approx. Price (PKR) | Notes |
|---|---|---|
| Basic 2000 LPH (moderate TDS, standard pretreatment) | 1,700,000 – 2,200,000 | Moderate bore water TDS, standard automation |
| 2000 LPH with softener + antiscalant dosing | 2,200,000 – 2,700,000 | Hard water / higher TDS source |
| 2000 LPH + UV + ozone + storage + full pretreatment | 2,500,000 – 3,200,000 | Full commercial setup with post-treatment |
| 2000 LPH + PLC automation + full system | 2,800,000 – 3,500,000+ | High-automation commercial installation |
Prices are indicative as of 2026. These figures are starting reference points. A site-specific quotation after water testing is the only accurate way to price any 2000 LPH installation. Contact Aqua Prima for a quotation.
| Factor | Lower Cost | Higher Cost |
|---|---|---|
| Source-water TDS | Below 800 ppm (fewer membrane elements) | Above 1500 ppm (more elements, stronger pump) |
| Pretreatment | Simple sediment prefiltration | Softener + iron removal + antiscalant dosing |
| Post-treatment | None or carbon polishing only | UV + ozone + mineralisation |
| Storage | Standard tank | Elevated storage + distribution pump |
| Automation | Manual operation | PLC-controlled with alarms and monitoring |
| Installation | Simple indoor location | Complex civil work, long pipework runs |
| Parameter | Typical Specification |
|---|---|
| Rated output | 2000 LPH (actual varies with source TDS and temperature) |
| Est. daily output (20hr operation) | ~36,000–40,000 litres |
| Recovery rate | 60–75% (depends on source TDS and pretreatment) |
| TDS rejection rate | 95–99% (membrane dependent) |
| Power consumption | Typically 7–15 kW (pump and pretreatment dependent) |
| Membrane elements | 8–16 elements (4” x 40” or 8” x 40” depending on design) |
| Reject water | 25–40% of feed water (varies with recovery design) |
| Cost Category | Approx. Annual Cost (PKR) | Notes |
|---|---|---|
| Electricity (pump operation) | 200,000 – 500,000 | Depends on tariff, operational hours, pump size |
| Prefilter replacement | 30,000 – 80,000 | Depends on source-water sediment load |
| Membrane replacement (amortised) | 80,000 – 200,000 | Per year over 2–4 year membrane life |
| Antiscalant & chemicals | 20,000 – 60,000 | Depends on hardness and dosing requirements |
| Service and inspection | 40,000 – 100,000 | Pump inspection, TDS monitoring, general service |
Annual maintenance cost is typically 5–10% of installation cost. High source-water TDS or hardness increases operational cost. See maintenance services.
Every 2000 LPH quotation from Aqua Prima starts with a water test. Contact us to arrange a site visit and source-water analysis.
